縮放與偏移
| Eng | 繁中 | 日本語 | 한국어 | 简中 |
設定 > 縮放與偏移
(
Overview
The Model Scale & Offset configuration allows users to adjust the model’s scale, position, and rotation with precision. It provides tools for aligning the model to the ground, setting uniform height, and fine-tuning offsets.
Key Features
- Scale Adjustment: Modify the overall size of the model with exponential precision.
- Ground Offset: Set the vertical position relative to the ground.
- Uniform Height: Scale the model to match average human height.
- Rotation Control: Adjust the model’s rotation in degrees.
- Positional Offsets: Fine-tune horizontal offsets along the X and Z axes.
- Snapping Options: Enable snapping increments for precise drag adjustments.)
配置
| 設定 | 值 | 描述 |
|---|---|---|
| ⊖ 模型縮放 | [0] (-3 ~ 3) | 調整模型的整體縮放。數值採用指數形式以便更精細控制。 |
| ⊖ 地面偏移 | [0] (-2 ~ 2) | 設定模型相對於地面的垂直偏移。 |
| ☑ 統一高度 | [ON] | 啟用後將模型縮放至平均人體高度。 |
| ⊖ 旋轉 | [0] (-180 ~ 180) | 設定模型的旋轉角度（度）。 |
| ⊖ X 偏移 | [0] (-5 ~ 5) | 調整模型在 X 軸方向的水平偏移。 |
| ⊖ Z 軸偏移 | [0] (-5 ~ 5) | 調整模型在 Z 軸方向的水平偏移。 |
| ☑ 吸附 | (0) | (0), (0.1), (0.2), (0.5), (1), (2), 設定拖曳調整的吸附增量。較小的數值允許更精細的控制。 |
| ≡ 預設值 | 統一實際大小 | 統一實際大小, 微型, 巨型, 初始材質, |